Whilst we specialise in the repair, rebuilding and maintenance of Hydraulic Pumps, Hydraulic Motors, Final Drives, Swing Boxes, Centre Swivel Joints etc, we can also offer service exchange units, spare parts and replacement units, depending upon your requirements.
Therefore, if you are experiencing any problems then please contact us to discuss the options available, or you can speak with one of our engineers if you require more technical help.
We can repair, replace and supply spare parts, for Hydraulic Pumps, Hydraulic Motors, Final Drives, Swing Boxes, Centre Swivel joints etc, that are fitted to machinery across the following markets
Mobile Plant (From the smallest Midi to the largest machinery used in quarries/mining)
Komatsu D61PX-15 Hydraulic pumps and Motor Strip, Clean and Rebuild process.
All three units came into us due to leaking. On stripping the units our engineer found in the HSS Pump the Swash support was badly worn along with the link arm, the HSS Motor's Valve plate was cracked and in the Fan pump the swash support and ball bearing were badly worn, the pistons and the piston sub assembly had a lot of lift in them and the retainer plate and ball guide had signs of wear. Therefore, we replaced all damaged/ worn parts and lapped all cylinder blocks and valve plates back to 100% contact and replaced all bearings and seals as standard. All these problems was down to having the wrong grade of oil in the tank.
Unit now back to OEM standards and now back working on the machine.
If you have a problem with one of your machines please give us a call on 01527 870793 or please visit our website cjplantmaintenance.com/
This unit came into us as customer reported the pump was "leaking profusely from the end cap". On stripping the unit we identified that the front housing (case assembly) was cracked. Therefore, we replaced the damaged housing, Lapped the Swash support, Cylinder block and Valve plate back to 100% contact and replaced all bearings and seals as standard.
Unit now back to OEM standards and was issued with 12 months written warranty.
Repair/reconditioning process of Main control valve block fitted to a Volvo EW180. Unit arrived due to contamination within the hydraulic system which resulted in damage to 2 of the spools. We have the facilities and expertise to replace the damaged/worn parts allowing us to carry out a VERY cost effective repair. One of the spools was so badly damaged we had to have it made as it was a non-serviceable part. The unit was completely resealed and is now back to OEM standards. (all our work comes with 12 months warranty) To see the repair process see click on our Youtube link:link lnkd.in/dPuhz3e
If you would like any further information please call 01527 870793, or email email@example.com ... See MoreSee Less
For all your hydraulic repair needs, including Hydraulic pumps, motors, swing boxes, final drives, control valve blocks etc, please consider our services. All our work comes with 12 months written warranty. To see our rebuild process, take a look at our latest videos on Youtube.